In the video, I also tested some random electronics components. You need to take a look at those components. You will be amazed. Personally I usually use an old USB webcam and just modify the focus. [ More than capable of ~x200 magnification. ] First of all, make sure your microscope can work with external devices. Among all Andonstar products, models that work with both PC and an HDMI monitor are ADSM201, ADSM301, ADSM302, AD409, AD246S-M, AD249S-M, AD246S-P,...

Ad407 Andonstar - Digital Microscope - AliExpress Ad407 Andonstar - Digital Microscope - AliExpress

On the front of the microscope monitor we have got multiple buttons the Power ON/OFF, Mode/Menu, Digital zoom in, Digital zoom out, OK/Start video Record, Picture capture, infrared sensor, and the focus controller. The HDMI output is clear and provides you with more detail than the built-in screen, which has a 1024×600 resolution. Usually the built-in screen is more than sufficient just by itself, however. I already have an optical binocular but I don’t like to use it and would prefer a digital microscope.We also liked that the scope has a remote control so you can operate it without touching it. We’ve used scopes where pushing the buttons to do things like snap a photo sometimes causes vibrations or worse when you are trying to focus on something specific. This is simply amazing, this tiny component as compared to my cell phone is now of the size of a cell phone or even larger, I can clearly see each and every detail. I don’t see any prominent noise. But, if in case you see any noise then you can reduce the situration and contrast values on your TV and it will completely remove the noise. Anyway, using the zoom in and zoom out buttons on the remote controller, you can further increase enlarge the subject. I have measured the thread of the UV lens for you and it is 30 mm in diameter (29.77 mm to be exact). The bottom of the microscope has 2.5 mm of thread depth available. Support Microscope and HDMI Screen Dual Screen Display】This AD407-Pro digital microscope supports HDMI output, so you can observe on a larger scale. The dual display of the microscope screen and HDMI screen allows you to share your discoveries with your team. The viewing angle of the screen is excellent as well. You don’t have to sit exactly in front of it to see what is going on. When looking from the sides or the top/bottom, the screen is still clear.

ANDONSTAR AD407 USER MANUAL Pdf Download | ManualsLib ANDONSTAR AD407 USER MANUAL Pdf Download | ManualsLib

There is a menu button on the remote controller; simply press that button and it will open the Menu for you. It’s just like doing settings on a TV. You can set the resolution; currently, the FHD is selected, I will also test the QHD and UHD after connecting this with a smart 42 inches TV. You can also set the exposure. You can turn ON and turn OFF the Date Stamp. You can control the sharpness.We can also do these settings without even going to the menu; you can see all these buttons. Ultra-high definition 2160P Video Record, 7-inch IPS screen while supporting HDMI output, microscope screen and HDMI screen can display simultaneously that allows you to see a more microscopic world and free your eyes all the time.The 3x digital zoom is probably the most useful feature here. Because the 4 megapixel CMOS sensor resolution is higher than the 1024×600 resolution of the built-in LCD screen, you can zoom in without any loss in detail on the screen.

ad407) for PCB Looking for a digital microscope (ad207 vs ad407) for PCB

The Andonstar AD407 comes with several accessories that help improve your experience with the microscope. Remote This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. The box also contains a set of spring-loaded PCB clamps that you can attach to the base. These aren’t mentioned anywhere in the assembly instructions or manual. You can install them as follows: One example of such a device is the Andonstar AD407. It is a digital microscope that is often used for SMD work. It is the successor of the popular Andonstar ADSM302. It comes with a variety of features that make soldering SMD components a lot easier. Smart Remote Control to Operate】It is convenient to control the microscope by remote control on any occasion. You don't need to press the LCD microscope, which is perfect to avoid shaking the screen. Use the remote control to take photos and videos, zoom in and out, etc.It takes around 2 to 3 minutes to fully assemble the Andonstar AD407 Pro Digital Microscope. Link to the video is given at the end of this article. Industrial-grade Metal Lens and Protective UV Filter】High-quality industrial metal lens is high temperature resistant, and suitable for soldering and repairing. The assembled UV filter is perfect to protect the lens from heat and smoke during the process of soldering, and also acts as a filter to reduce reflection. Where earlier versions of digital microscopes required connections to computers or external monitors, they now come with built-in screens. This lets you use them as a stand-alone device.

Andonstar AD409 HDMI Digital Microscope 10.1 inch LCD Screen Andonstar AD409 HDMI Digital Microscope 10.1 inch LCD Screen

Another way to increase the working space is to install the lens by clamping it at the bottom, instead of at the top. The bottom of the lens has a fixed area that the thumbscrews can grab on to. The soldering iron is a common electronic tool used for soldering and repairing various electronic devices such as electronic components and circuit boards. Before using a soldering iron, there are some important precautions... This is the Power cable, plug in the USB in the Microscope Monitor USB interface. Use the Spotlight interface on the power cable to power up the LEDs.First, plug in the USB into this AC to DC adaptor to supply the required voltage.Press the power button to turn On the Spotlights and the Microscope Monitor anduse these + and – buttons to increase and decrease the brightness.

Customer reviews

Metal Base Plate with Adjustable LED Fill Light】The upgraded large base (size: 7*7.8 inch) provides more operating space to do electronic work, such as phone watch repairing or soldering larger circuit boards. The 2 side lights on the base can be bent flexibly and can be dimmed and brightened. Easily see the details of the product clearly and brightly, making observation more comfortable and precise. Similarly, you can use the remote to change the exposure settings without having to dive into the settings menu, and to adjust the digital zoom without using the hardware buttons. It is a useful addition to the microscope, but if you only use the microscope for SMD soldering you will likely not be using the remote much. Andonstar AD407 Pro 3D HDMI Soldering Digital Microscope Review and Testing-Today, I am going to review and test the Andonstar AD407 Pro 3D HDMI Soldering Digital Microscope. So, let’s go ahead and start the unboxing and see what’s in the box.