The Ender 3 V2, Ender 3 Pro, and Ender 3 Neo are the same as the original Ender 3, but some are larger, like the Ender 3 Max, Ender 3 S1 Plus and S1 Pro, Ender 3 Max and Max Neo. With toolless, easy assembly, the official Creality enclosure consists of a rigid iron pipe frame held together by three-way connectors, on top of which sits a heat-containing cover to prevent drafts. The Ender Extender 400 Z Height Kit extends the Ender 3’s Z-height to 400 mm, which is almost far more than the Ender’s standard 250 mm. This makes it more of a filament management system than a true dual extruder system, but the results are very much the same. You can do multi-color prints, and multi-material prints, and it can even mix filaments together for some unique results.

If you’re looking for a sturdier alternative to Creality’s tent-style enclosure above, 3D UpFitters’ Ender 3 kit is a solid option.

Downsides of the Ender 3 V2 Neo

Put the firmware file "Ender-3 V2 Neo-Marlin2.0.8.3-HW-V4.2.2-SW-V1.1.5.2-CR-Touch-20230312.bin" into the root directory of TF card. Manually leveling your bed is tedious. So if your print bed remains in one flat position for long, you won’t have to do it all the time. Full Metal Bowden Extruder

Everything from ease of use, printer longevity and (most importantly) print quality can be improved by using some of the best Ender 3 upgrades. Manual leveling adds extra time, hassle, and generally having auto-leveling improves your 3D printing experience. Having to manually re-level your printer every few prints is an annoyance, and human error can affect prints. From pre-made choices to DIY options you can build for basically free, the best Ender 3 enclosures offer something for everyone Bear in mind that there’s a trade off between speed and precision. As you increase your print speed, you might see a fall in the quality of your 3D object. This comes in handy if you have a large collection of models but the names are difficult to discern the models from.The V2 comes with all the tools you should need for assembly—although, as mentioned, I also needed to use one of my own wrenches to resolve an issue. This is not the model to get if you are looking to simply plug and print. Many closed-frame printers, as well as the pre-assembled Prusa i3 MK3S+, fit that profile, though the latter costs about three times as much as the V2.

You’ll have to print out a special mount, and as a DIY project, there are instructions and files to guide you through the upgrades. For the first print, I attempted one of the test prints included on the memory card. I used a third-party PLA filament; the print came out brittle and poorly cohesive. I tried again, this time using Ender filament, but try as I could, I couldn't get it to extrude. I expected that the extruder might be clogged, so I preheated the extruder to PLA melting temperature and took the long, very thin needle that Creality includes with the printer and poked it into the nozzle a few times. This cleared out the problem, and from then on the V2 extruded normally. In retrospect, I suspect the problem wasn't with the filament, but that the nozzle was set a little too close to the print bed, touching it in places so that filament wouldn't come out and causing the clog. Buying an Ender 3 enclosure is essential if you’re 3D printing ABS, Nylon, and any other high-temp filaments prone to warping. Alongside, the mainboard boosts memory to 32-bit, opening the door to more functionality and features, including add-on ports for expansion, automatic bed leveling, filament runout sensors, and thermal runaway protection. The Creality V4.2.7 is also compatible with Marlin 2.0, so worth pairing with a firmware upgrade.For later Ender 3 models, there’s also more powerful laser upgrades for the Ender 3 S1& S1 Pro, and an updated laser module with 10W power, Creality Updated Laser Module, which is much better suited for laser cutting. The company specializes in 3D printer enclosures and levies that expertise to offer some of the best options on the market. Ender-3 V2 NEO is a refreshment in Creality collection, it is upgraded Ender-3 V2 but cheaper than Ender-3 S1. If you don’t need a direct drive extruder, it is a great and affordable alternative to S1. Now if you want to buy the Ender-3 V2 Neo, you will get the price a little bit below 300 dollars. Also if you don’t want to print TPU in that case Ender-3 V2 Neo is a great and affordable alternative to Ender-3 S1. Anyway, it’s a great machine that should give you a pleasant 3D printing experience. It’s perfect for beginners and even experts. For best results, you might want to use Creality filaments on their printers. A good example is this roll of 1.75 mm PLA that came with our printer. The PC-coated flexible magnetic spring steel build plate on the Ender 3 V2 Neo offers excellent adhesion and a hassle-free usage experience. A little flex of the bed material is all it takes to separate the 3D prints. The smooth bed surface requires little to no cleaning. However, the bed surface is more susceptible to damage than other materials, and it can be difficult to remove prints in some cases.