NOTE: Replacing the diaphragm may not always resolve your problem as the fault could be with the valve itself but it is a cheap way to try and resolve and is usually successful. We also recommend washing your valve in warm water to ensure any limescale or grit which could be causing an issue is eliminated. If necessary replace valve seal by removing the retaining clip and inserting screwdriver down centre hole as shown. S362567 - Conceala 2 Cistern - Bottom - Bottom Inlet - Pneumatic Dual Flush valve - No Flushplate - 6 or 4.5 litre flush Conceala 2 universal height, top inlet cistern - pneumatic dual flush valve - no flushplate - 6 or 4.5 litre flush

S362467 Conceala 2 Cistern - Top Inlet - Pneumatic Dual Flush Valve - No Flushplate - 6 or 4.5 litre flush DIAPHRAGM/WASHER:The diaphragm/washer on the flush valve. This slowly perishes over the years and is worth changing to ensure optimal flushing: Our SKU FTB976 here.

These valves are fitted to Conceala 2 concealed cisterns with either Armitage Shanks or Ideal Standard branding PLEASE NOTE YOU WILL NOW RECEIVE THE NEW VERSION AS PICTURED, PLEASE SEE SECOND IMAGE FOR REFRENCE. THIS IS JUST FOR THE FLUSH VALVE ONLY, DOES NOT COME WITH THE SEAL, CLIPS, NUT. ETC THERE ARE SPARE PARTS AVAILABLE FOR THE ORIGINAL SV93467 FLUSH VALVE WHICH ARE DETAILED AT THE BOTTOM OF THIS LISTING We are currently using Royal Mail Parcelforce and DPD as our delivery providers, all small items will be delivered by Royal Mail, these can take up to three working days to reach you.

If only one of the buttons on the S4399AA dual flush plate has stopped working the most likely problem is that one of the SV70367 pneumatic diaphragm washers fitted into the top of the flush valve has failed NOTE - THE ORIGINAL VALVE SV93467 IS DISCONTINUED HOWEVER WE NOW SEND OUT THE REPLACEMENT VALVE WITH NO CAGE. As of 01/07/2022 - Ideal Standard have no baskets available to fit this model. Please reuse the existing basket if able to do so. We will update this description with the basket part number once it becomes available.All system components must be installed in accordance with uk water regulations. if in any doubt a suitably qualified person should be consulted.

If the only way to access is essentially breaking through the tiled top – is there any way to do this to limit the damage/repair work needed? Ideal Standard have only ever manufactured one type of seal and clip, so if you have a seal and clip like this, then this listing will be the replacement you require. Conceala 2 universal height, bottom inlet cistern - pneumatic dual flush valve - no flushplate - 6 or 4.5 litre flushRefitting the valve is reversal of removal, taking care to locate the tabs of the valve body into the lugs of the valve seat. Ideal Standard Flush Valve, Sottini Conceala Dual Flush Valve, Sv05767 Sv93467 Concealed Cisterns Pneumatic Flush