Ironing aids or fragrance water could have been added to the water tank. This can cause problems with the steaming function, causing water to leak. Use only tap water or distilled water or a mixture of these two types of water. A retailer may sell the products at a higher or lower price than the price listed in our Online Shop. Generally, you should use as many as seven strokes for high-traffic areas; three or four for lighter ones. What are all the attachments for? The water tank is detachable. Detach it, and fill the water tank under the tap. You may fill the water tank any time during ironing. How to avoid the iron leaving shine/ print on my garment during ironing? This kettle is equipped with boil-dry protection. The kettle will automatically switch off if it is accidentally switched on when there is no water or not enough water in it.

Put the iron in a horizontal position and wait for a while before using the (vertical) steam boost function again. Regular descaling prolongs the life of the kettle. We recommend that you descale regularly - at least monthly. Press the power on/off button to switch on the steam generator again. How to fill/refill water when tank is empty? Let the ingredients cool down to approximately 40°C before processing them. Which size should the ingredients be before processing?Steam setting is being used at too low a temperature - The steam function should be switched to "no steam" when using the iron at lower temperatures or the water tank shoud be emptied. This is due to the initial release of build up pressure inside the boiler and this pressure will drop to a steady state level when the steam trigger is continuously depressed. It builds up pressure again when the trigger is released. The droplets are caused by steam that was still present in the hose which has cooled down and condensed into water. This causes water droplets to come out of the soleplate. Answer 2: The iron is not hot enough. Set the temperature dial to a temperature suitable for steam ironing. The Spray function or Spray button on my iron isn't working (properly). Self clean is required or has not been carried out correctly - Refer to the instruction booklet for self clean instructions.

This noise is caused by movement of the valve that lets steam pass from the steam generator to the iron each time when the steam trigger is pressed. This sound is normal. I hear noise coming out of the steam generator during ironing. Is this normal? We recommend that you don't use the kettle without fitting the filter as the kettle may not switch off automatically if the filter isn't fitted. Scale may also give your drink a powdery taste. When you have switched the appliance off, wait until the blade has stopped turning completely before opening the lid. Regularly descaling your kettle will help to: reduce the boiling time and save energy, keep the inside of the kettle clean and extend the kettles life. Solution Cause 3: The kettle needs to be descaled. Regularly descaling your kettle will help to: reduce the boiling time and save energy, keep the inside of the kettle clean and extend the kettles life.To descale your appliance, you can use any descale agent suitable for use in plastic bodied products or use white vinegar. Do not use cleaning vinegar. On 4-slice models around 95% of the outer elements will glow red after a number of uses but the inner elements will not as they only have half the power of the outer ones. Can I cancel my toast at any time?