Please set up the Deco units on the same network via Wi-Fi at first through the Deco app before you wire them together. A Technical Community is provided for you to discuss our products at https://community.tp-link.com. The internet connection is unstable or suddenly stops working when connected to the Deco network? 07-12-2023 797113

Deco works in Router mode by default, please note that the satellite Deco is requested to wired to the LAN port of the main Deco or a switch connected to main Deco’s LAN port to avoid a network loop. When the Deco is set to work under Access Point mode, you can wire satellite Deco to any Deco unit or the main modem/router. TP-Link Mesh: With advanced Deco Mesh Technology, units work together to form a unified network with a single network name.Devices automatically switch between Decos as you move through your home for the fastest possible speeds. Whole Home Coverage: Deco uses a system of units to achieve seamless whole-home Wi-Fi coverage up to 5,500 sq.ft. †— eliminate weak signal areas once and for all!And if that’s not enough, simply add more Decos to the network anytime to increase coverage. Speed test in "Deco>>>Network>>>Test Internet Speed" measures the maximum speed of the main Deco, it doesn't mean all devices connected to Deco could reach that speed. Q1. Why do some features disappear or become different after mixing different Deco models together?This is because that different Deco models may support different advanced features. In this case, Deco M5 supports HomeCare while Deco X90 supports HomeShield. Whether the Deco app displays HomeCare or HomeShield features, depends on which Deco model is set up as the main Deco. All WAN/LAN ports will operate as either WAN or LAN ports. Only one port can serve as a WAN port at a time.

Fast Dual-Band WiFi: Deco S4provides fast andstable connections with speeds of up to 1167 Mbps † andworks with all internet service providers (ISP) and modems. Clients need to support 802.11k/v/r and may require additional set up. Performance may vary depending on the client device. Note: When Deco works in Router mode, it’s notsuggested to connect more than 1 deco unit to the existing router directly, as it may cause a network loop.Deco S4 (3 модуула) доставя Wi-Fi signal на площ до 370 квадратни метра. И ако това не е достатъчно, просто добавете още Deco модули към мрежата, за да увеличите покритието. IoT compatibility refers only to smart devices that can be controlled via the Deco app. Other wireless devices can still connect to Deco for normal Wi-Fi use. v / r и може да се изисква допълнителна настройка. Производителността може да варира в зависимост от клиентското устройство. Deco S4 осигурява бързи и стабилни връзки със скорости до 1167 Mbps, и работи с всеки голям доставчик на интернет услуги (ISP) и всеки модем. Why does Parental Control show my device has reached the time limit while it actually hasn’t? 06-01-2022 23094