With that in mind, I wanted to put all the info on these trimmers in one place and compare the Andis Outliner 2 vs T-Outliner to help you figure out which will suit you best.

Make sure your blades are kept sharp either by sending them out to get sharpened or by sharpening them yourself. Ultimately, the Outliner 2 is a great choice for all your trimming needs, and hits almost all of the right notes when it comes to a great trimmer.To ensure smoother hair cutting action, Andis tend strengthen their products’ blades with carbon. The T-blade of the T Outliner trimmer follows the same formula. Well, the Andis brand is always committed to providing strong blades for their hair trimmers and clippers. It’s important to know that these trimmers are essentially the same but with different blades . Choosing one or the other will depend on what kind of hair cutting you’re trying to do. Well, it’s a fact that the blades are unusually sharp which makes them even better for close and precise cuts. Just make sure that at the end of the day you are giving it a good brushing with an old toothbrush or something similar. I like to also take off the blade and use a can of compressed air to blow out the loose hairs that get trapped underneath.

If you do opt to use pre shave oil, make sure you clean the blade well afterwards. Especially if you will be using these in a barbershop. The fine teeth will easily get gunked up by the oil and hair mixture. As you go, it will slow down to the point that it will have a hard time cutting, so you really need to stay up on this. Hair is quite acidic and will also dull your blade over time if you don’t make sure it is cleaned off. Weighing in at just over 200 grams, it's lightweight and comfortable with a deep-tooth, carbon steel GTX blade designed for close-cutting and which can be zero-gapped using the Andis Zero Gapper Tool. On the other hand, if you happen to be reading this in search of a professional trimmer to have at home, the Outliner 2 is a great choice if you do a lot of body trimming.Andis has been around for over 95 years providing over 90 countries with their superior products. Stylists, barbers, groomers, and even consumers trust Andis with all their cutting needs. From the features discussed above, it’s safe to say the trimmer is undoubtedly a first-class performer; with wide T-shaped blades and a 7200SPM motor. The T-blade setup is the primary difference between these two models. The T-Outliner has a special T-blade which makes it super easy to do perform detailed cuts that the Outliner 2 can’t quite match. The T shape of the blade helps to do some nice detail work and to get in those hard to reach areas. When you want to do some beard designs when trimming, you can use the ends of the blade to work it around, which is nice to have. I make sure all of the trimmers I get have that shape since I end up lost when they don’t.

As well as the new skeleton casing, the GTX-EXO comes with Andis's new GTX-Z blade with a gold coating for superb corrosion resistance. The blade has a pre-set tighter gap than the standard T-Outliner, making it perfect for fine detailing. If you are using it as intended, meaning to outline the edges of the hairline or beard, then you’re only using it for a few minutes at a time. Then it rests while you finish the cut and move onto the next one. I find when I am working that I only use the trimmers about every 15 minutes or so. This gives them plenty of time to cool down and I have never needed to use a spray on the blade. Besides being great for close-up work, this is a very comfortable trimmer to hold/grip. The body is slightly rounded, and it has molded grooves which helps make sure that it doesn’t slip out of your hand, even if your hands are wet. The T-Outliner is a little louder. Again, because the T-Outliner uses a larger blade, it is a little louder than the Outliner 2. This probably won’t make or break your decision as it shouldn’t be noticeable enough for it to be an issue. Power comes froma lithium ion battery that gives a non-stop run time of 100 minutes but recharges in just 60. The GTX-EXO can also be used on the cord, so you won't run out of power mid-trim.The overall winner is the T-Outliner for most jobs, especially if you find yourself doing a lot of intricate cutting.

At times, their products are so good that it’s hard to decide which one works best. Many people have run into this very dilemma when trying to choose between the Andis Outliner 2 and the Andis T-Outliner. Not surprisingly, the T-Outliner is right up there with the best trimmers on the market. Where it excels above the Outliner 2 (and many others) is in the details, literally. This involves toughening these steel blades with Carbon to ensure that users benefit from the strong blades’ efficiency and also durability. Just like the Outliner 2, the T-Outliner is fitted with the same strong, fast motor that produces roughly 7,200 strokes per minute. It also only weighs 11.5oz so it won’t weigh you down while producing those masterful hair styles and designs.The primary difference with this trimmer and the Outliner 2 is the T-blade, thus the name T-Outliner. The T-blade extends over the head of the trimmer ever so slightly, giving you the ability to really work in the smallest of areas while ensuring a super clean cut every single time. Strong, fast motors with 7,200 SPM. The faster that the blades move, the smoother the cut. Lower SPM motors can actually grab/pull the hair, leaving for user discomfort and, at times, ingrown hairs.