A surprisingly small reduction in belt tension yields a proportionally large reduction in slack-side tension.

BELT SLIP – Hycote BELT SLIP – Hycote

The sliding angle φ’ relevant for power transmission can also be expressed by the circumferential force F c to be transmitted.Vulcan Grip not only interrupts the vicious circle, you can now get full performance from your machine. e. the greater the elastic slip, the greater the difference in belt speeds and thus also in the circumferential speeds of the pulleys.

Belt May Silence Adjusting Tension or Cleaning Fluid From a Belt May Silence

The surfaces of pulleys must therefore not be too rough, as one might misleadingly assume due to the increased static friction on rough surfaces! This means that the speed of an imaginary point on the belt is always slightly higher than the peripheral speed of the pulley. div class="row d-flex align-items-center justify-content-center">