Various shapes and sizes of dowel screws are available which are sold with such strategy as to entice the consumer. Drilling becomes somewhat easy with the help of inked measurements. Now, you just have to follow the marks with the help of drill. A smaller screw will not be able to hold the log or joints in place while a larger one will not fit. Every woodworking application that requires clean-looking joints. Once installed, dowel screws are invisible.

There are numerous ways in which a dowel joinery can be used. The guidelines below are not meant to be the end all be all for dowel screw usage, it is simply one example showcasing how dowel screws are used. The screws are needed to be installed meticulously otherwise the overall impact of the furniture or the flooring may go into vain. The next thing to do is drilling which the core of dowelling. As mentioned earlier, you should always go for a narrow drill.Clamp the Leg - For a dining room table or bar stool leg, clamp the leg in a straight up-and-down position to yourportable work bench. To accomplish this, place the leg in the clamp and tighten it. Take a level up against the leg to determine if the wooden piece is plumb. Set the level on top of the leg to see if the leg is level. Drill into the leg to make the hole and wipe away any excess sawdust. Pretty simple, isn’t it? Before diving into these steps deeper, let’s learn more about dowel screws and what are they used for. What are Dowel Screws? You just have to meticulously place the drill on the marks, keep the speed slow and just insert the tip of the dowel. We are committed to providing the highest possible standards of services and products, with all our practices abiding to a stringent ISO 9001:2015 accredited Quality Management System.

These are the few points you should remember before actually going on the task: How To Use Dowel Screws Size of the dowel screw This helps in keeping the wood in the same position. Unlike the normal studs, these have wooden screw threads at both the ends. Generally, the screw should not be more than half the width of the log. The shape of dowel is another issue along with size.You can make use of paint, stain or polishes for the same. Spread the paint evenly on the surfaces and let it dry. If you have an experience with woodworking than you can even go for plastic dowels otherwise birch dowels are the best choice for beginners. Type of drill