Press the desired Preset button momentarily. The preset number and station frequency will appear in the display. The following show the symbols used for the equipment. Be sure that you understand their meaning before use. To allow the radio to find the available stations, it is recommended to carry out a full scan of the entire DAB Band III frequencies. Rotate the Volume/Tuning Control/Select knob to get the desired sound level. The LCD display will show sound level changes. SW Version" shown on the display. Press the Volume/ Tuning Control/Select knob to view the software version installed in the radio.

Rotate the Volume/Tuning Control/Select knob until "Language" shown on the display. Press the Volume/ Tuning Control/Select knob to enter the setting. Stations stored in the preset memories can be overwritten by following the procedures described above. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. Rotate the Volume/Tuning Control/Select knob to scroll through the list of available stations. Press the knob to select the station.Press the Advanced setting button and rotate the Volume/Tuning Control/Select knob until "DRC Value" shown on the display. Then press the Volume/Tuning Control/Select knob to enter the setting. The display will show the current DRC value. Rotate the Volume/Tuning Control/Select knob to choose "Yes". Press the Volume/Tuning Control/ Select knob to confirm the setting and a full reset will be performed. Bit rate/Audio type Indicates the digital audio bit rate and audio type for the currently tuned DAB station. Press the Advanced setting button and rotate the Volume/Tuning Control/Select knob until "Station List" is flashing on the screen. Press the Volume/Tuning Control/Select knob to enter the list of the stations. From time to time, new DAB radio stations may become available. Or you may have moved to a different part of the country. In this case you may need to activate your radio to scan for new stations.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. When using FM mode, your radio can be set to scan either local stations or to scan all stations including distant radio stations. Manual Tuning – FM Rotate the Volume/Tuning Control/Select knob to select the following options and press the knob to confirm the setting. Press the Advanced setting button and rotate the Volume/Tuning Control/Select knob until "Manual Tune" shown on the display. Press the Volume/Tuning Control/Select knob to enter the manual tuning mode.

i have a makita ip64, i have to connect via bluetooth from a moblie phone to get the radio station working. my question is the volume only goes to 30, can this be increased as we are working in a factory. Rotate the Volume/Tuning Control/Select knob to select the desired DAB channel. Press Volume/Tuning Control/Select knob to confirm the chosen frequency. If your radio fails to work correctly, or some digits on the display are missing or incomplete, carry out the following procedure. For preparation of the item being shipped, consulting an expert for hazardous material is required. Please also observe possibly more detailed national regulations. Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity.

Rotate the Volume/Tuning Control/Select knob to choose your desired language. Press the Volume/ Tuning Control/Select knob to confirm your setting.Connect a stereo or mono source (i.e. iPod, MP3, or CD player) to either AUX IN 1 or AUX IN 2 by audio cord.