The Anthem is a comfortable, reliable, proficient, cost effective, user friendly airbrush. The two angle needle tip precisely mates with the Anthem’s cone shaped nozzle enabling a single needle/nozzle configuration to spray virtually any desired material, thus eliminating the need for fine, medium, or large needle/nozzle variations. The Anthem’s body design provides exacting balance and long term user comfort. The Anthem also provides flawless performance in the most rigorous of production airbrushing environments. The revolution was a good introduction to modelling, but isn't flexible enough. As noted, the .35mm set up wasn't working for larger areas, but it will be the weekend before I can play with the various nozzles and some water or food colouring to see what coverage I can get with the standard 0.3 set up. Single needle/nozzle for spraying all mediums, inks, dyes, watercolors, acrylics, enamels, lacquers, glazes, latex, Air-Opaqueª, Air-Tex ®, MODELflex ® Totally Tattoo ® and Totally Tanª colors

Single needle/nozzle for spraying all mediums including inks, dyes, watercolors, properly reduced acrylics, enamels, lacquers, and airbrush-ready colors including Spectra Tex, Air-Opaque, Air-Tex, Model flex, and Totally Tattoo. Single needle/nozzle for spraying all mediums, inks, dyes, watercolors, acrylics, enamels, lacquers, glazes, latex, Air-Opaqueª, Air-Tex®, MODELflex® Totally Tattoo® and Totally Tanª colors The needle bearing is Teflon, and Badger will replace it free if it ever wears out or gets damaged. Fine nozzle set for details down to 1mm, high flow larger nozzle set and larger cup for area work..

Others Also Ordererd

Single needle/nozzle for spraying all mediums such as inks, dyes, watercolors, acrylics, enamels, lacquers, glazes and latex. The Anthem®, Model 155, is the most comfortable, reliable, proficient, cost effective, user friendly airbrush ever. The two angle needle tip precisely mates with the Anthem’s cone shaped nozzle enabling a single needle/nozzle configuration to spray virtually any desired material, thus eliminating the need for fine, medium, or large needle/nozzle variations. The Anthem’s body design provides exacting balance and long term user comfort. The Anthem® also provides flawless performance in the most rigorous of production airbrushing environments. Features Mine has a rubber pad on the trigger, which I really like. But, Badger has discontinued this feature. On flexibility for the future, you can add a 0.15mm nozzle set for ultrafine work and a 0.6mm nozzle set for very large area work. There is also a micro paint cup that covers the cup thread if you are doing a lot of detail work as well as 15ml, 50ml and side feed 15ml bottle options available.

Paul http://www.britmodeller.com/forums/index.php?/topic/234976552-iwata-triple-action-handle-issues/?fromsearch=1 Maybe I should change the focus of this thread. What would you recommend for broad applications if I could only afford a single brush? Eg something like the H&S brush with easily interchangeable needles and nozzles for both fine work and base coats. http://www.britmodeller.com/forums/index.php?/topic/234976552-iwata-triple-action-handle-issues/?fromsearch=1 We have a number of customers in your part of the words, so you may know someone that has one you can have a go with.

Features

The triple action handle was good for ease of cleaning, but it's also good for fine(ish) work, such as pre-shading panel lines by setting the amount of paint required. The main question is how fine do you need to spray and what are the largest areas you are looking to cover and what is your current setup giving you?

Coverage with the model you show may not be due to the airbrush itself but how your using it, you may be too close when spraying, getting wetter areas than others Single needle/nozzle for spraying all mediums, inks, dyes, watercolours, acrylics, enamels, lacquers, glazes, latex, Air-Opaqueª, Air-Tex®, MODELflex® Totally Tattoo® and Totally Tanª colours The Badger 155 Anthem Airbrush is the most comfortable, reliable, proficient, cost effective, user friendly airbrush ever. The two angle needle tip precisely mates with the Anthem’s cone shaped nozzle enabling a single needle/nozzle configuration to spray virtually any desired material, thus eliminating the need for fine, medium, or large needle/nozzle variations. The Anthem’s body design provides exacting balance and long term user comfort. The Anthem® also provides flawless performance in the most rigorous of production airbrushing environments. Badger 155 Anthem Airbrush Features: I'm thinking about upgrading to an airbrush which is either easier to swap out needles and nozzles or which can reasonably manage detail and lay down a larger area of paint when needed. I was initially looking at the Badger 150, but I'm intrigued by the Badger 155 Anthem and the 105 Patriot. The 155 and 105 have a dual taper needle, allowing fine detailing and wider coverage. The 105 has a finer needle and nozzle than the 155, but it looks able to lay down a lot of paint when required (base coats, single colours, gloss coats, etc). Developed to deliver precise performance and fine line detail, the Patriot is an ideal airbrush for custom art, graphic arts and illustrative work. The Patriot airbrush will operate at 30 PSI, as well as lower pressure settings (10-15 PSI) and is ergonomically balanced for hours of comfortable airbrushing.It has a 0.2ml nozzle set that paints down to about 1mm for detail, the internal 0.5ml or small 2ml paint cup can be used for this. As well as a 0.4mm nozzle set and 5ml paint cup for larger areas. It also has a preset handle to set the maximum paint flow. The Patriot is a low maintenance airbrush, easy to clean and simple to operate; it will spray any properly reduced paint or airbrush-ready media. The Anthem also features the patented rear needle release allowing the user to remove the needle without having to remove the handle.

Single needle/nozzle for spraying all mediums, inks, dyes, watercolours, acrylics, enamels, laquers and latexDon't spray too far away from the model either as your likely to get a rough finish where the paint is drying before it hits the model. I mainly work in 1/72. My smallest work would be a Luftwaffe mottle on a Bf109, the largest is the Vulcan which is stashed under the bed. Generally speaking, 1/72 fighters, both props and jets.