Nun hat sich die Gelegenheit ergeben, dass ich doch an ein paar Interview Aufträge gekommen bin, und war drauf und dran mir ein Interview Mikro (am besten Funk) zu holen. Da bin ich auf den Handadapter für das Wireless GO gestoßen. Der große Vorteil, ich musste kein extra Mikro bestellen und konnte mein schon lang bewährtes System weiter nutzen. The Wireless PRO receiver features an LCD display that shows you critical information including audio levels, connectivity, and recording status. System settings can also be controlled via the receivers menus and left/right navigation buttons, either with a short-press (less than 1 second) or long-press (1 second or more). Three buttons allows the use to operate functions depending on which screen is displayed, corresponding to the on-screen symbols.

Another thing you can do however is use it as a light, wireless option for video livestream or podcasting, pairing it with a mic table or floor stand and have it when on the move or a smaller setup if your main mic is stationary at your workplace or home, especially if they’re too big, clunky or heavy to lug around with you and take time to setup. This is a nice alternative or even replacement if you’re happy with the Wireless Go sound and approach to capture. The receiver and transmitters each contain a rechargeable lithium-ion battery capable of up to 7 hours of use when fully charged. They can be charged independently using their respective USB-C ports and connected computer or other USB charging device, or they can be charged simultaneously using the included smart charging case. The charge case can store more than two full recharges for the whole system. The handle is 237mm tall, which is a nice length with plenty of room to grip with your hands, and offering enough elevation for your arm to rest more naturally. The Rode Interview GO is made of good-quality plastic, which helps keep it light but offers a satisfying amount of weight that doesn’t feel cheap. I like the texture of the handle fairly smooth and soft-touch with some texture so even sweaty hands won’t have difficulty keeping a hold of it. The handle has shaped like a tube, with a squared-off side all the way up the stork, where the RODE Wireless GO first or second-generation clips into. who is the Rode Interview Go for? Buy RODE Interview GOSeries III 2.4GHz digital wireless transmission with 128-bit encryption delivers crystal-clear audio under any conditions and excels in dense Wi-Fi and Bluetooth environments (shopping malls, conventions, hotels etc) The dual receiver has a display that shows information including incoming audio per channel, reception quality, battery life, volume and recording status, whilst a 3.5mm TRS output allows analogue audio connection, whilst USB-C allows for iOS digital output. The internal rechargeable Lithium-ion battery can be charged via 5V, 0.3A USB.

Transmission is via digital 2.4GHz for up to 200m line of sight range, and 128-bit encryption is used to prevent crosstalk. The Rode Wireless GO II kit is super-compact, weighs next-to-nothing and takes up little to no space in your kit bag. The receiver weighs just 32g and the transmitters weigh just 31g and both feature the same innovative clip design seen on their predecessor which is simple and easy to clip on your subjects, your camera, your camera rig, your boom pole and more! In addition, this of course means that you have access to the huge range of Wireless GO accessories available including the Rode MagClip GO. Ultimate Versatility The Wireless GO system auto-pairs in under three seconds and transmits via RØDE’s Series III digital 2.4GHz transmission, which is optimised for shorter range operation in dense RF and Wi-Fi environments, but also offers an impressive line-of-sight range of 70m. There is a 3-stage gain control to tailor your output precisely to your camera or recording device and a handy battery-saver mode. The in-built lithium-ion batteries last up to 7 hours and are charged via USB-C. All-In-One For Run ‘n’ GunFrequency range: 50Hz to 20kHz. Maximum input level: -20dBV, 3.5mm input. Maximum SPL: 100dB SPL, 1m, microphone. Transmission range: 200m, line of sight. Dimensions (WxHxL): 45.3 x 18.3 x 44mm, transmitter; 45.5 x 18.3 x 44mm, receiver. Weight: 30g, transmitter; 32g, receiver.

A somewhat gripe others have with the windshield is the fact the Rode logo is a little too much on the big, advertising billboard side than people are comfortable with. After recording and having used it in some projects, while it is fairly large on the windshield I didn’t find it distracting enough to feel the same way, although I’d welcome a reduction in size for the Rode logo to appear more subtle than garish to the eye. The foam windshield is nice and is bigger than what you might expect for a streamlined Interview Go design, but I like the round foam. A narrow compact windshield would add to the aesthetic but here I find the plosives and harsh sounds are handled and reduced well when speaking into the Interview GO adapted Wireless GO. This super-versatile kit contains two kits, each of which contains two transmitters and a receiver. This enables you to capture two sound sources at once, ideal for interviews and filmmaking etc. but can also be used as a single channel wireless microphone when recording a single sound source. The kit is universally compatible thanks to a 3.5mm analogue TRS output for plugging into cameras, as well as a digital audio output via USB-C which can be plugged into smartphones and laptops. Finally, you also have the option to switch between mono and stereo modes. This allows you to record each transmitter separately or to combine both for flexibility in post-production. Failsafe Measures The Rode Wireless GO II is designed for mobile journalists, videographers, vloggers and more! This super-compact and incredibly versatile wireless microphone system build off its predecessor offering a dual-channel receiver and two transmitters. What's new is a range of upgrades including new failsafe precautions such as onboard recording capabilities, universal compatibility (with cameras, smartphones and computers), an extended-range of up to 200m (line of sight) and vastly improved transmission stability. The Rode Wireless GO II kit will provide you with professional-level audio, professional-level ease-of-use and will elevate your production to the next level. Included accessories: 2x Wireless Pro transmitters, 1x Wireless Pro receiver, 1x Charge Case PRO, 1x SC2 ​3.5mm TRS to TRS cable, 1× SC21 USB-C to Lightning cable, 1x SC22 USB-C to C cable, 1x USB-C to C superspeed cable, 2x MagClip GO, 3x Furry, 2x Lavalier II ​microphones, 2x Pop Filter for lavalier, 2x Mic Clip lavalier, 2x Mini Furry lavalier, 1x Accessory Case, 1x Lens Cloth. Included accessories: 1x SC21 USB-C to Lightning cable, 1x SC22 USB-C to USB-C cable, 1x SC2 3.5mm TRS to TRS cable, 1x SC7 3.5mm TRS to TRRS cable, 2x furry windshields, and a carry pouchWireless PRO is capable of recording three different audio sources at the same time - two transmitters, and a receiver mic. The receiver outputs a stereo signal from both its USB-C and 3.5mm connections, resulting in two audio channels. These channels can be routed to the output in a number of different ways, but by default Merged mode is selected. In Merged mode, the two transmitters and receiver microphone, if it is being used are combined into a single summed output. This is useful for live presentation setup, or only using one transmitter and want the audio to be recorded onto both channels of your recording device. Other modes include Split mode - where each transmitter's output is recorded onto separate left/right channel, allowing individual processing in post production; and Safety mode - where the Wireless PRO will also output a second channel of audio -10dB lower than the main channel, useful for reducing the risk of clipping. When Safety mode is activated, all inputs from transmitters and receiver microphone are be merged to the left channel and the safety channel will be output to the right channel. The Wireless GO is an ultra-compact wireless microphone system that is unique in its clip’n’go versatility and incredibly compact form-factor. The transmitter features an in-built omnidirectional condenser capsule and can be used as a clip-on mic or with a RØDE lavalier, sending crystal-clear, broadcast-grade audio via 2.4GHz digital transmission to the on-camera receiver. It’s the perfect wireless mic solution for content creators in all disciplines: filmmakers, on-camera presenters, newsgatherers, vloggers and more.