Yes, I'll be removing the plasterboard so these both look perfect, but I think the Shower PL8 is ideal for me.

Shower Fixing Plate Professional shower installation kit Marflow Shower Fixing Plate Professional shower installation kit

Design: Innovative patented plate design eliminates lateral skew when tightening fixings; Chamfered compression nuts for easy and controlled tightening. Our product development started with the Shower PL8, a pioneering shower fixing plate which is designed, manufactured and patented for First Fix Installations. Covered by a UK patent, the Shower PL8 is the best solution for achieving perfect Pipe work and a firmly fixed shower. An accurate and reliable shower fixing plate which is suitable for 15mm pipework. It has easy clamping devices which hold the pipes in place when initially fixing to the wall. Read Less Using a pipe slice cut the copper pipes to ensure that the shower mixer cover plates meet the finished wall.

Delivery Policy

This approach means that Marflow can proudly boast that its St James range of traditional products is British designed and manufactured. Plastic construction with brass connectors and chrome-plated shrouds. Enables rigid fixing of any exposed bar valves with 150mm centres to 15mm pipework protruding through the cavity wall surface. Suitable for all plumbing systems. The MARFLOW Wall Fixing Plate PL8 designed to enable rigid fixing of exposed bar shower and bath/shower valves with 150mm pipe centres to concealed Ø15mm pipework, protruding through cavity wall surface.

Shower PL8 – Shower Fixing Plate – Tilers Choice

Install Ø15mm copper hot and cold feed pipes ensuring they will protrude approximately 60mm from the finished wall surface.Newtonsoft.Json.JsonReaderException: Error reading JArray from JsonReader. Path '', line 0, position 0. As this information is anonymised and aggregated it cannot be used to identify any individual user actions. Once fitted the bar valve is extremely secure (can withstand a direct pull force of 130kg with no defects). Install 15mm copper hot and cold feed pipes ensuring they will proturde approximately 60mm from the finished wall surface.

Showers | Showering | Screwfix Showers | Showering | Screwfix

The steel plate is fixed into the wall cavity during the "first fix" stage with a simple clamping device that holds the pipes in position, perfectly square and at the correct distance apart.Once fitted the bar shower valve is extremely secure (can withstand a direct pull force of 130kg with no defects) We are currently using Royal Mail Parcelforce and DPD as our delivery providers, all small items will be delivered by Royal Mail, these can take up to three working days to reach you. As Boilers and radiators are installed by third parties, they do have to install in compliance with regulations and manufacturer standards to get the full benefit of the warranty. I normally chase shower pipes up centrally together then split left and right in a ‘Y’ shape before elbowing out at the right centres. If you followed this method you could simply tee off the hot and cold going left and right at the bath tap height.

Marflow PL8 Shower Fixing Plate - Builder Depot

hmmm, interesting, the thought never crossed my mind. Still strong enough, expecially if you consider that the copper is tightened onto the plate using compression nuts. Works in the same way as the Bristan Using a pipe slice cut the copper pipes to enssure that the shower mixer cover plates meet the finished wall.On each product, under the specification tab, you will find more information on the guarantee or Warranty. This or similar: http://www.screwfix.com/p/h-c-contemporary-bar-valve-fixing-kit-chrome-effect/76919 Any opinions about the best way to fit a shower into a stud wall. I'm not too worried about the cost, I just want to get it right 1st time. Any links to pictures/products would be greatly appreciated.