We can divide our RCconnectors, cables and adapters roughly in two categories.First are Battery Connectors and other is General or OtherConnectors. Pros:Cannot be connected wrong way. Easy and safe to use. Good grip and very strong connector body. Pretty easy to solder(watch out for high temp or the plastic body may melt!) Deans connector can be found from many RTR-cars that are equipped with brushless electronics and are supposed to be run with LiPO battery. Before first use, please make sure that the goggles and motion controller have been updated to the latest firmware version. Additionally, use DJI RC-N1, DJI RC, or DJI RC Pro to update the drone to the latest firmware version. Otherwise, the linking between the aircraft and the goggles and motion controller will fail. Medium sized XT-60 is for many the only connector they want to use and many hobbyist replace default T-Plug connectors to these before they drive their car. Uses and fits to3.5mm connectors.

Smallest XT-30 is not commonly used as battery connector inRC cars but can be used to connect auxillary equipment such as servo or winch. Can be used as Receiver Battery connector. Uses and fits to 2mm bullet connectors. Did you know.. Spektrum Smart batteries have integrated memory chip that storages data from charging cycles etc! This maybe a little confusing as there is a large amount of different kind of JST-connectors available. In RC Cars we usually use just the JST XH and JST RCY-family. Larger XT-90 is often used in 1:8 and large scale of RC cars as they deal with very high currents and bursts while being easy and safe to connect. Uses and fits to4.5mm bullet connectors. It is anyhow a very good and pretty safeconnector type when used in battery chargers.Many chargers use this as a standard as it allows the user to use many different type of charging cable. Please note that open cable ends are still very easy to short circuit so remember to remove your charging cable from the charger after you're done!Don’t worry you are safe with us! Most of our customers feel that they get excellent service in the rare occurrence that they encounter a problem with the product they have bought. Larger terminal size means that it can withstand higher voltages than XH. Due its size it is also more convenient to use than clumsy Futaba connector. Use crimping tool or pliers for cable connection and push terminal in to housing. Used by: TeamCorally,Hobbywing. RC Chargers.Popular aftermarket connector. Use XT-60 in 1/10 size RC cars and XT-90 in larger, 1/8 cars and bashers. APAS 4.0 is not available while recording 4K/48fps, 4K/50fps, 4K/60fps, 2.7K/48fps, 2.7K/50fps, 2.7K/60fps and 1080p/120fps video.

This connector type is only suited for "those who know what they are doing", ie. more experienced hobbyists and professional RC drivers.

When soldering Traxxas connectors, first solder the leads totabs and push them in to connector housing afterwards. Futaba type of housing has a little tab to prevent it to be connected wrong way while JR/Hitec have a little bevel at the bottom of the housing.

Pros: Super Easy and safe to use. Good grip. Cannot be connected wrong due large plastic tab (do notremove the tab!) Easy to solder.This connector has two spring-loaded terminals in 90 degree angle to each other. When done right, it is impossible to connect it wrong what makes it very safe for even beginner to use. It is anyhow pretty small and many people find it hard to connect as it can be very tight. DHL Express and UPS Express are our fastest delivery options. Both options can reach almost anyplace inEU in 1 day, but some places take 2 days. Traxxas iD technology also makes for very convenient and secure battery charging as this technology eliminates complicated charger programming by automatically configuring and optimizing the charge settings for Traxxas iD batteries. Pros: Cannot be connected wrong way. Easy and safe to use. Good grip and very strong connector body. Pretty easy to solder, use heat shrink. What is different is that pins of EC-connector are separate from the body while in XT-connector they are molded in the connector housing. This makes the soldering process bit easier as you first solder the lead in to tab and then put it into connector body afterwards.

These connectors are often also very colorful that helps you locate and indicate them. Depending of the type,RC Battery Connectors can withstand very high currencies and voltages.

TOOLS/ACCESSORIES

RC Battery Connectors can withstand strong currencies and are built strong. Sturdy structure ensures that they can be connected and disconnected hundreds of times as you need to remove them from the car to recharge them. Bullet is widely used in RC Chargers. When the charging is ready, remember to disconnect the battery from the cable first!