The UV power of a 3D printer is the intensity of the ultraviolet (UV) light source used to cure the resin during the printing process, and it is a measure of the energy delivered per unit area of resin. UV power is measured in watts per square centimeter (W/cm²) and determines the rate at which the resin cures. Higher UV power cures the resin faster and correspondingly faster print speeds. Different UV power levels will have an impact on the quality and efficiency of the print. Adjusting the UV power according to the needs is one of the practical printing skills. The serial number of the defective product and/or visible evidence describing the defect may be required. If a tighter budget is your deciding factor, however, then the original Anycubic Mono is a perfectly serviceable machine with no real downsides in terms of print quality or usability. While slower than the others, it’s still one of the better and cheaper resin printers available on the market today. The Mono 4K is an impressive addition to Anycubic’s line of resin printers, and has a host of features geared toward those of you who want to print big impressive projects without spending too much. Build Volume It comes with a screen protector for the LED glass, which covers the glass to protect it from scratches or dreaded resin drips.

Essentially, this means that if build volume is your main focus, then the Anycubic Mono is definitely the one for you. While it falls short in other areas by comparison, the dollars to build size can’t be beaten. Print Speed As is expected of such a low price tag, the Photon Mono is fairly rudimentary in design. However, it has a build volume of 130 x 78 x 165mm, which isn’t too different from its counterparts.

Compared to a sand-blasted build platform, the laser-engraved build platform of the Photon Mono X 6Ks has better flatness and adhesion of the print models. Consequently, the possibility of detachment of the model is reduced and the printing success rate is improved! When printing transparent or translucent resin, the UV power can be adjusted between 45% and 50% to present better printing results.

The upgraded version of the self-developed Anycubic Photon Workshop 3.0 slicer offers you a wide range of versatile possibilities: Punching, propping, peeling and arranging layouts. Professional, free and with a simplified user interface! Note: The warranty period for the LCD Screen of some machines has been extended from 3 months to 6 months. Effective models: Mono 2, Mono X 6Ks, Mono M5s, Mono M5 and LCD printers listed by Anycubic later. Technology Within 30 calendar days of receiving the product request a return for an exchange, if the product suffers performance failure.Failure to return the product to Anycubic within 7 business days after the replacement has been confirmed by Anycubic. The Photon Mono X 6Ks is equipped with a 9.1-inch HD monochrome display with a resolution of up to 5760 x 3600 pixels. With a contrast ratio of 380:1, sharp and finer details can be displayed. While it boasts a standard touchscreen, the LCD screen of the Anycubic Mono 4K is at 6.23’’. This makes perfecting your settings and designs much simpler and more satisfying to carry out, and looks pretty cool to boot.