REMOVES OXIDE FILMS: Use to remove light oxide films that are left on metal surfaces after shot blasting or grit blasting The next stage is to prepare the radiator for the rust removal chemicals to be applied. First, place a large sheet beneath the radiator to protect the flooring, whether this is carpet or hardwood. The next step is to pour a good amount of Jenolite’s Rust Remover Gel into a plastic container, and then using a paint brush, spread the gel onto the radiator, paying most attention to any areas significantly affected by rust. If you are still unsure of the differences between rust remover and converter or want to know which method is the best for your rust removal project, read our article Rust remover vs rust converter. Other questions we get asked How to remove rust from alloy wheels For an extra layer of protection, apply an Anti-Rust Primer to your radiator, such as Jenolite Anti-Rust Primer. This gives it an extra layer of protection before you apply the radiator enamel top coat, and helps slow down the corrosion process, giving a longer lifespan to your radiator. The solution works by turning the iron oxides which cause rust into a protective chemical barrier. The protective barrier acts as a primer, allowing the metal to be painted over again.

Once the rust has been removed, you can then use Jenolite Alloy Paint Aerosol in silver to renovate and refurbish your alloys for that new car look! If there are particular components of your car that need de-rusting then pay attention to these areas or for really small jobs just clean these surfaces. Rust removal also takes more effort. It is a manual process making it more difficult than a rust converter.FUEL TANKS: Safe for use on rusty fuel tanks - simply pour in and leave to work. Turn, tank every few hours until all rust is removed

Rust converter is easy to use, it provides a no wipe solution meaning you can apply and go about your day. There’s no continual working the solution into the rust, less elbow grease. Our range of direct-to-metal paints can be applied on top of the affected area and instantly provide reliable rust-proofing for years to come. Produced by Hammerite, our car paints are available in pots or in spray cans and in a variety of popular colours. They’re perfect for DIY car-rust repairs. Car rust removal solutions from Halfords IDEAL FOR USE ON: Automotive rust spots, bodywork, chassis, wheel arches, tools, bikes, boats, caravans, gates, garden furniture, etcSome people may find that rust converter is a simpler way forward. Rust converter transforms hard to remove rust into a bare and stable compound ready for you to paint over. A rust converter actually stops the condition of the rust from getting worse and can be an easier option if your problem is particularly stubborn. However, for automotive applications, we recommend doing the job properly with rust remover. How To Apply Rust Converter

If you are getting underneath a car, make sure you use axle stands or ramps and wear eye protection and a mask. Any areas that are holed will need welding, so don’t waste your time with treatment, but surface rust should be rubbed with a wire brush and then painted with a converter. If you are treating a rust bubble on the bodywork, you will want to remove as much of the rust as possible before treating or it will soon reappear under any filler and top coat. Once the substance has soaked through use a dry cloth to wipe the surface. If there is any visible residue or staining then you can repeat the process. Preventing rust in the future One side of the steel sample was left unpainted while the other was sprayed with a single coat of primer and acrylic top coat, replicating a typical DIY repair. Once dry, the samples were then doused daily in salty water for four weeks to encourage any corrosion to reappear. We then scored them on ease of use, rust-resisting performance and price. Verdict

More often than not, you can use Rust Remover and Converter interchangeably. We advise against using Rust Remover on delicate metals or sensitive areas, as this could compromise the metal's integrity. For such areas, our Non-Hazardous solution would be ideal.

Radiators are one of the things in our homes that are most susceptible to rusting, due to the nature of them being full of water and it being heated to very high temperature. This water leaking out can lead to corrosion of the metal, and therefore the formation of rust. For chrome, it is recommended that you use our Non-Hazardous Rust Remover Liquid. A more gentle formula isn't as harsh as other products and chemicals and is ideal for use on softer metals. You can apply this with a paper towel and it will work in 4-24 hours. Work the solution using a wire or steel wool brush. This is a great alternative to chemicals that could damage your chrome. Jenolite non-hazardous is reusable too which makes it great value for money. Cars sometimes get neglected, with rust building up over time, caused by the surrounding environment or weather. If this is what’s happened to you, you might find yourself asking exactly how to get rid of rust from your car. This article will answer your questions on removing rust from your car and how to stop car rust from returning.

How to remove small rust spots from car

None of the products will affect stainless steel, but are very effective in removing surface rust and blue scale from welded areas. After removal of the scale, rinse with water and dry the surface. Carrying out rust removal is a much longer process which requires more time and patience. As the remover needs working continually you can’t just leave the product to work its magic, you have to make it a real project.