You can set the temperature of your home for each room individually via the Bosch Smart Home app. To do this, go to the home screen in the app and select the room in which you want to set the temperature. Tado Smart Radiator Thermostat kan, udover temperatur, måle luftfugtighed og give anbefalinger til hvordan din luftkvalitet forbedres. Derudover understøttes geo-fencing, som giver mulighed for fx at sænke temperaturen, når der ikke er nogen hjemme. Other brands, including Tado, Netatmo, Eve and Energenie did not provide us with specific information on update support periods. You can also set the temperature of each room using the thermostatic radiator valves. In the diagram below: Once done, Alexa discovers your Smart Radiator Valves. With voice control you can set a specific temperature in a room, the change is made until the next scheduled set point.

EasyControl is compatible with Bosch ETRV's, which allow precise temperature control for each room via the EasyControl Smart Radiator Thermostats. Scenarios are a way of creating routines to control multiple devices at once. There are preprogrammed ones, including Leaving home, which turns off all lights, activates the alarm system and can turn on Simulated Presence mode. Scenarios can be run through the app or via a Bosch wireless switch; there’s no option to run them automatically. The EasyControl Adapter converts automatically communication signals, e.g. from iRT/OpenTherm/on-off to EMS protocol. Important for the commissioning of the Bosch EasyControl Adapter is the sequence switching on the devices. Always follow the following sequence: All the smart radiator valves can communicate with the smart thermostat, meaning you can turn the boiler on and off by changing the settings of any of the heating devices. Out of our three home setups, this gives you the most complete control of your heating. Control over heating is rather basic. In manual mode, you can just set a room temperature using the slider in the app or the manual buttons on top of the Radiator Thermostat. In this mode, the temperature is set permanently. The Radiator Thermostat then adjusts the valve to keep your room at the right temperature.Precise and efficient: measures the temperature at a predefined point in the room, controls Radiator Thermostats II and thus ensures the optimal temperature. Bosch can see if your product is online but cannot gain access to your information. If necessary, you can authorise Bosch to gain temporary access to your product. The temporary access can be revoked at any time by turning it off in the app. You can also set up heating schedules within the app to change the thermostat temperature throughout the day. In the diagram above, the thermostat is located in the living room. So you could set it to 18°C and also schedule this to change to 20°C between 7pm - 8pm, making it nice and cosy for you in the evening when you settle down in front of the TV. Flexible use: can be mounted on a wall or installed freestanding thanks to wireless mounting and battery power.

By default, the system is set to do this immediately, but you can change the delay to between zero and 180-seconds. Normally, I’d argue that implementing this feature in software is better, with the thermostats measuring the temperature drop to detect when there’s a window or door open. However, Bosch’s Door/Window sensors can also be used in the alarm, setting off a siren when the alarm is armed. You can also set the heating temperature manually by either setting the manual mode or adjusting the temperature in the app or directly on the thermostat/room thermostat. In this case, the manually set temperature remains set only until the next switching point. The Room Thermostat II and Room Thermostat II 230 V are also convincing thanks to their modern LED display, which clearly and legibly displays all information relevant to room-temperature control. Intuitive operation by turning and pushing the button of the Room Thermostat II and Room Thermostat II 230 V is now additionally supported by visual signals from a multicoloured LED strip. For example, red LEDs indicate that the temperature is being increased, while blue LEDs show that the temperature is being lowered.Automations are also available and work in a similar way to IFTTT. You set a trigger (a time of day, or something happening such as a door opening), then you can set what you want to happen with an action. Actions are limited: I couldn’t set a Hue bulb to turn on or off, although I could change the temperature on a Radiator Thermostat. The only workaround is to trigger a scenario that you’ve configured to turn on the lights you want. Bosch Smart Home Heating and Radiator Thermostat – Performance Bosch Smart Home Radiator Thermostat er testvinder i forbrugermagasinet Tænks test at smarte radiatortermostater. You can create zoned heating If you want smart heating where you can control the temperature and whether the heating is on or off in each room, smart radiator valves allow you to do this. Not being able to see the current temperature is hugely disappointing, since it makes it far harder to work out what’s going on and if the room is at the right temperature or not.