A spreader bar or spreader beam is designed for use with a sling that connects the lifting machine hook to the ends of the beam. The beam typically has connection points on the underside that hook to the cargo for lifting.

Nothing is more important in the lab, manufacturing facility or other workplace as your health and safety. Avantor® can help with a robust line of safety products and personal protective equipment -- from waste bins to safety signs. Lifting beams and spreader beams are designed for routine use and are used throughout all types of industrial and construction applications. A lifting beam or spreader beam is classed by legislation as a lifting accessory and as such fall under general lifting regulations in the United Kingdom. Lifting beams are an engineered product designed and made to suit the load to be lifted, Hoist UK's design team is available to assess and advise on your specific requirements and can provide a lifting beam solution for your needs. Lifting beams are excellent for general purpose lifting, as well as for lifting weak or flexible loads that require the additional support of other equipment like lifting magnets or a lifting vacuum. Provide a vertical lift with controlled or no inward pull for eyebolts and similar lifting points and loads which must be protected from crushing forceImportant Note: It does NOT include a frail elderly person who is otherwise able-bodied or any person who is only temporarily disabled or incapacitated, such as with a broken limb. Because the sling legs lengthen the distance from the hook to the cargo, spreader beams as lifting devices are generally a limited option when there is little headroom clearance. Types of Spreader Bars Fixed Spreader Beams We are committed to providing you with products and processes that make it easy for you to focus on results... At DLH Online, our Raptor lifting beams will suit your requirements and we supply Raptor's industrial products at extremely competitive prices.

Many of our modular spreader beams are available to rent - look out for the Hire Me button on our lifting beams and follow the on-screen instructions. Spreader beams distribute the load across more than just one point, resulting in increased stability. They are excellent for applications where the cargo is too large or heavy to be lifted from one singular connection point. A spreader, also known as a spread beam as shown in figure 5 can be considered a strut in pure compression and the line of action of the top of the sling and the load suspension point coincide at the neutral axis at the end of the spreader. The main difference is the design, which dictates the way the force is transmitted during the lift. A lifting beam is under pressure at the single lifting point and therefore subject to shear and bending, while a spreader beam is designed to work under compression and spreads the load out evenly over a longer area. The ADJUSTABLE ALUMINIUM H-BAR LIFTING BEAMS - 1T TO 3T CAPACITY are H-bar aluminium adjustable lifting beams suited for the lifting of various loads up to 3 tonnes in spans from 2 to 5 metres. They are equipped with 4 articulating, rotating hooks with forged safety latches, alongside tea-resistant eyelets for use with synthetic slings and cables, etc. Tractel Lifting Beams and SpreadersOur bioprocessing products are engineered to the highest quality standards and regulatory requirements. Explore our solutions for multiple applications - vaccines, monoclonal antibodies, recombinant proteins, cell or gene therapy.

Connects to sling with openings on the top of each end; bottom of beam lift is designed with large J-shaped hooks to hold and lift plates. ContainerVWR has a range of new services designed to streamline your operations, help you make cost savings and manage your laboratory effectively... Lifting beams and spreader bars are designed to lift heavy loads with a crane safely and efficiently. Both are considered a below-the-hook lifting device since the attachment to the load (or loads) takes place below the crane's hook. Lifting beams / Spreader beams can be designed and made for general use or as bespoke one-offs for specific lifts and loads. Single or multiple attachment points for the load can be accommodated as well as single or multiple points of suspension dependent upon the type of hoist / crane being used to lift the load.

These are excellent for lifting applications where limited headroom is an issue. The adjustable design makes it easy to correct for unbalanced loads. Ultra Low Headroom All of our spreader beams come fully certified and tested, so you can rest assured that they're fit for purpose. Our spreader beams have a modular design, allowing them to be used in a number of different configurations for a wide variety of different tasks. Lifting beams are used in conjunction with lifting slings, which are sold separately - to browse our range of slings, please select one of the following options:Cleanrooms or other controlled environments used for research or manufacturing need specialized products. Avantor can help maintain cleanroom standards with protective apparel and environmental monitoring equipment. Sectionlift UK - Spreader Beam Design, Manufacture, Sales and Hire - Lifting Beam Design, Manufacture,Sales and Hire A well performing QC laboratory ensures the integrity of a company's production process from raw material validation to finished product verification... At DLH Online, our Tractel lifting beams will suit your requirements and we can supply Tractel's hoisting products at competitive prices.