The AC-Mesh-Pro is an AC1750 Wi-Fi 5 AP, offering more performance than the non-pro model. It doesn’t have removable antennas, but instead comes with high-gain (8 dBi) antennas built-in. The AC-Mesh-Pro is big enough that it could act as a lunch tray. It is harder to hide, but the additional antenna gain provide impressive range and performance. The AC-Mesh-Pro can operated on standard 802.3af (15W) PoE, or with Ubiquiti’s 48V passive PoE. And, since the Ubiquiti U6-Pro supports 160MHz channel width, I tried to keep the interference to the minimum to see the maximum performance that the AP can reach. At closer range (5 feet), the QCN9024 is absolutely phenomenal, delivering an average of 934Mbps upstream and 625Mbps downstream. Ubiquiti U6-Pro vs Other WiFi 6 Access Points – 5GHz (80MHz) – 5 Feet – Upstream. For my next test, I tested from 3 different places in my house. I wanted to show the impact of distance from your AP on a typical 20 MHz 2.4 GHz or 80 MHz 5 GHz channel. The above tests were very close range, and were meant to show an absolute best-case scenario. These distance tests are more realistic, and the 15 feet + 1 wall results are more likely what you will see in typical use.

The Ubiquiti U6-Pro UniFi WiFi 6 Access Point is an indoor WiFi 6 AP with 5.3Gbps over the air speed and a 300+ client capacity. The U6-Pro is a dual-band WiFi 6 (802.11ax) access point that represents the next generation of high-performance wireless technology for home and enterprise users. Delivering blazing fast over the air speeds of up to 5.3 Gbps over its 5GHz and 2.4GHz channels, the U6-Pro will maximise the WiFi experience of any residential or office deployment. Plus, with its ability to support over 300 concurrent clients, the U6-Pro ensures reliable wireless coverage across even the most device-dense environments. The U6-Pro also marries power with ease of use through streamlined setup, configuration, and mobile-friendly management via the UniFi Network app. Key Features The curious thing is that the industry wants to push us now towards WiFi 6E. Slow down, guys, you’re not going to pull this off in the WiFi networking market, although I applaud your effort. I know people that are still using 802.11n (WiFi 4) routers, so the adoption at the home-user level is really not that great; neither is at the SMB or enterprise level because the equipment costs money, the monitoring and the management for new hardware costs money and it’s not worth it upgrading every couple of years. Wireless Test (5GHz) The AC-Mesh and AC-Mesh-Pro are still relevant, but are also due for an update. Ubiquiti hasn’t replaced these models with direct replacements, but they have made newer outdoor APs that can be considered instead. Wi-Fi 6: U6-Mesh The U6 Lite has a 1.3 Gbps aggregate throughput, the U6 LR has 3.0 Gbps, the U6 Pro and U6 Mesh both have 5.3 Gbps.The U6 Lite is only dual-band (2.4 GHz and 80 Mhz channel-width), but the others also support the 160 MHz channel-width. The U6-Lite is the cheapest and least-powerful Wi-Fi 6 AP UniFi offers. It has the least range and performance, but it also has the lowest price and smallest size. It’s the same size (and uses the same mount) as the older AC-Lite and nanoHD. It is not dust or water resistant, and should only be used indoors. When further away, you can see the impact of the lower transmit power for APs like the U6-Lite. Higher power and higher spatial stream APs offer more distance, and can compensate with features such as beamforming. Range is where the U6-LR and U6-Pro show their biggest advantage over the U6-Lite. Higher gain antennas and higher transmit power allow them to reach further. A few extra dBm is enough to allow an AP to effectively cover a larger area. I have been using the UniFi U6 Lite in my home for many months now and have been impressed by how much it improved Wi-Fi in my home. Range is very good and so are transfer speeds. But how does it compare to the other U6 models?

The throughput at 30 feet was 238Mbps up and 121Mbps downstream, but things get a bit problematic at 45 feet and farther. That because the attenuation shot up to 79dB and the throughput was barely decent, 43.9Mbps upstream and 12.7Mbps downstream. At 70 feet, I could no longer see the network, so it’s 0Mbps. Before reaching conclusions, I just assumed that it’s the fault of interference (which did ramp up after 30 feet) and it’s natural when using the 160MHz channel bandwidth on 5GHz. Opening up the U6-LR was a pain in the behind, but the Ubiquiti U6-Pro is even worse. The top plastic part is glued to the bottom section and even if I was using a heat gun, I still had to scratch and deform the case to finally be able to pop the top part off (this time, my fingers remained relatively intact). Ubiquiti U6-Pro Antenna Positioning.

Standard Warranty: 1-Year

Please Note: The UAP-PRO is no longer available. For an alternative, we recommend the UAP-AC-PRO . Ubiquiti UniFi Pro Access Point (UAP-Pro) In any case, on the bottom of the Ubiquiti U6-Pro, there is a dedicated area carved into the plastic where you can find the Reset button and a single Gigabit Ethernet port which supports PoE (802.3af). Left: Ubiquiti UAP-AC-PRO. Right: Ubiquiti U6-Pro. The U6 LR unsurprisingly has the best performance (speed and range) across both 2.4 GHz and 5 GHz bands, thanks to the highest signal strength and 4×4 MIMO on all bands.

I’ve seen this approach with lots of EnGenius access points, including the ECW230 and the latest WiFi 6E ECW336, and it works wonders for the heat management of compact access points. Ubiquiti still insists that their APs are suitable for outdoors, so there are no ventilation holes and you do get a silicone cover for the ports area, which means that the device will get hotter to the touch when it’s operational (due to the heat transfer), but there should be no risk of overheating. Ubiquiti U6-Pro Heat Management. Some other enterprise-level features that the UniFi WAPs provide are multiple SSIDs, VLANs, guest networks, and very high number of concurrent users (300+). Differences between U6 Lite vs Pro vs LR vs Mesh In-wall models are handy if you have Ethernet run to a wall plate. The three models I've tested aren't the best to compare because I don't have a AC-In-Wall-HD, or a Wi-Fi 5 model from Omada. Once again UniFi and Omada APs are generally the best value. The Instant On AP11D and AP17 are the worst value on a pure performance per dollar metric, but hopefully they'll be replaced with Wi-Fi 6 models soon. I don’t recommend using 40 MHz channels in the 2.4 GHz band, due to them overlapping with over 80% of the already-crowded spectrum. There’s only one non-overlapping 40 MHz channel in North America, and the rest of the world only has two. Like 160 MHz channels in 5 GHz, there is not enough available frequency for them to be reliably used in most situations. Wider channels also impose a noise penalty, and are generally worse at range than narrower channels. The U6 Mesh can be placed on a table, wall-mounted or ceiling-mounted, but the others are designed to be wall or ceiling mounted only. You can of course place the others on a table but coverage may suffer.Growing up in the early 2000s, I remember the Wi-Fi in our home being slow, unreliable but most of all extremely spotty. There were some areas of the house that were just dead zones. But after 2 decades, technology has advanced to the point where you can get speedy Wi-Fi that can stream multiple 4K streams simultaneously along with all the other traffic in a typical digital household R = This is downlink test, where the server is sending data to the wireless client. Without this flag, the client will send data to the server. Before getting to the actual results, I need to mention that a PoE adapter or switch is mandatory, and I used the Zyxel XS1930 which was way overkill for a Gigabit connection, but I had it already installed from when I tested the EnGenius ECW336 (not that Ubiquiti actually sends me anything, let alone an Ethernet switch). So, as I did with the U6-LR, I used three client devices, one with a WiFi 6 adapter and two with WiFi 5 cards. Ubiquiti U6-Pro vs U6-Lr vs Zyxel WAX650S vs WAX630S – Long-term speed test – 80MHz – Upstream – 5 feet. The U6 Lite and U6 Mesh have comparable 2.4 GHz performance at various distances, but at 5 GHz the U6 Mesh is faster.

Not bound by a contract, you can choose to migrate your devices from our cloud controller at any time. The Ubiquiti U6-Pro UniFi WiFi 6 Access Point is an indoor WiFi 6 AP with 5.3Gbps over the air speed and a 300+ client capacity. The U6-Pro is a dual-band WiFi 6 (802.11ax) access point that represents the next generation of high-performance wireless technology for home and enterprise users. Delivering blazing fast over the air speeds of up to 5.3 Gbps over its 5GHz and 2.4GHz channels, the U6-Pro will maximise the WiFi experience of any residential or office deployment. Plus, with its ability to support over 300 concurrent clients, the U6-Pro ensures reliable wireless coverage across even the most device-dense environments. The U6-Pro also marries power with ease of use through streamlined setup, configuration, and mobile-friendly management via the UniFi Network app. Easy to Deploy and Manage! UniFi is the revolutionary WiFi system that combines enterprise performance, unlimited scalability, and a central management controller. These access points have a refined industrial design and can be easily installed using the mounting hardware included. Benefits of our UniFi Cloud Hosting ServiceThe Ubiquiti UniFi Prooffers simultaneous dual-band operation with 2x2 and 3x3 MIMO technology. It has a range of up to 400 ft and 2 Gigabit Ethernet ports.The UAP Prois faster than the standard UAP model, offering speeds of up to 300 Mbps in the 5 GHz radio band and up to 450 Mbps in the 2.4 GHz radio band. But again, keep in mind that I kept the interference to the minimum, which means that it’s most likely close to impossible to reproduce this behavior in a dense WiFi area. Moving a bit farther from the AP while also keeping the WiFi 6 client device connected to the 5GHz (160MHz) network, I could see that the attenuation gets a bit more aggressive, going from -27dB at 5 feet to -58dB at 15 feet and -70dB at 30 feet. Ubiquiti U6-Pro vs Other WiFi 6 Access Points – 5GHz (160MHz) – 5 Feet – Upstream. Ubiquiti seems to have had different ambitions with its U6-LR and the U6-Pro, and that’s to make the transition towards the WiFi 6 standard as cheap and painless as possible, so neither really aim to be speed champions. The problem is that while there is a clear distinction between the U6-Lite and the other WiFi 6 Ubiquiti APs, the lines get very blurred when putting the U6-LR and the Ubiquiti U6-Pro next to each other. Yes, I know the former should reach farther (LR stands for long range), while the latter is built to perform better on the 5GHz, but is that really the case? Ubiquiti U6-Pro. There is a bump in the antenna gain of 0.5dBi for the 5GHz, while the transmit power is 22dBm as opposed to the 26dBm of the U6-LR, the platform is also different but is that enough to make a noticeable difference between the two models? There should be a difference, but I am not sure it’s going to be that steep, hence the small difference in terms of cost between the two models.