It is possible to solder copper tape, a practice which is largely used when working with non-conductive tape types. Separate strips can be soldered together, creating a strong join and a more reliable path for electrical connection to flow through multiple lengths.

For over two decades, 8330 has been our flagship product. Now, after much research and development activity, we are excited to announce 8330 will be replaced by an improved version, 8330D. 8330D offers improved productivity, curing at room temperature in only 5 hours instead of the 24, while offering twice the working time, 20 minutes instead of the old 10 minutes. As well, 8330D offers improved conductivity and flowability. It also provides higher safety, being free of SVHC’s and no Proposition 65 listed ingredients Electrically Conductive Adhesives (ECAs) are used for high-reliability applications such as aerospace, automotive, medical, and telecom products. However, Henkel also offers ECAs that are non-noble metal compatible which are ideal for handheld consumer devices. In both cases, conductive glues, adhesives, and epoxies offer viable lead-free solder alternatives for active and passive component attachment across a range of applications. Master Bond Electrically Conductive Adhesives | MasterBond.com". www.masterbond.com . Retrieved 2018-05-07.

Electrically Conductive Adhesives (ECAs) are used for high-reliability applications such as aerospace, medical, automotive, and consumer products. However, Henkel also offers ECAs that are non-noble metal compatible which are ideal for handheld consumer devices. In both cases, conductive glues, adhesives, and epoxies offer viable lead-free solder alternatives for active and passive component attachment across a range of applications.

Soldering is a relatively straightforward process, but it is important to solder safely and ensure the correct equipment and soldering iron tip is used to create a secure join. Safety is essential so always make sure you are fully prepared for the task before using soldering equipment. Copper Tape for Shielding Elecolit ® conductive adhesives are relatively simple to apply. With the appropriate selection of filler type, they can be dispensed through automated valves, high speed “Jet” dispensing systems, and screen printing. Although copper tape is not intended specifically for use on walls, some people have adopted it as a means of creating attractive, decorative wall art. Due to its high levels of versatility, copper foil can easily be adapted and shaped to suit a variety of patterns and designs. When there is a requirement for bonding large areas or joining complex parts, thermal adhesive films are the preferred materials. Larger bonding areas are problematic for liquid-based mediums as voids may result.also includes an advanced 'form in place' gasket process that enables us to efficiently apply conductive gaskets and environmental seals, directly onto enclosures, mouldings, covers etc Two-component epoxy adhesives comprise resin and hardener and are available in a range of viscosities. However, if heavily filled with conductive metal, viscosity can become quite high. If filled with silver, volume resistivity can be as low as 0.0001 Ohms∙cm. Strong bonds and gapless performance to enhance uniformity across seals and negate the need for mechanical fasteners. A high viscosity unfilled epoxy with independent heat-curing (60 minutes at 80°C) and light-curing (2 - 6 seconds at 60 mW/cm2) mechanisms. Very high Tg of 185°C.