Replace a fuse in the fuse box with this Fuse link T Tap to give you an extra fused spur to supply an accessory device. a b "ATO Series - Blade Fuses Automotive Aftermarket Products from Fuses - Littelfuse". www.littelfuse.com . Retrieved 2019-01-01. Micro 2 Blade Fuse 10 AMP, the perfect solution for protecting your vehicle's electrical system from overload and short circuits. This product consists of a micro 2 blade fuse with a rating of 10 AMP and a width of 9.1mm, making it ideal for a wide range of automotive applications. Mini ACZ dual-slot blade fuse holder, stand up to 20A each slot, suitable for any vehicle with a standard fuse slot Bosch type fuses (also known as ceramic, porcelain, continental, torpedo, European, or GBC type fuses) are used in old (often European) automobiles. The physical dimension of this type of fuse is 6×25mm with conical ends. Bosch type fuses usually use the same color-coding for the rated current. The DIN standard is 72581/1.

times you see an advertisement as well as help measure the effectiveness of an advertising campaign. It's my girlfriends car and likely I pulled out the one fuse that was a low profile one took my a while to even find where the fuses were. Was far easier in my fiesta

In-line fuse holders, with two standards: IEC publication 257 1968 Amendment no. 2 to this publication dated January 1989 and UL-standard no. 512. They help to save space. An inline fuse is often seen in add-on electrical accessories, where the manufacturer does not know the electrical current limit of the circuit you are going to patch into. This offers sufficient protection for that individual accessory, without regard to any other devices that might share the same circuit. Its sub-miniature design meets the need for more circuits to be protected while utilizing less space and its ability to cope with high temperatures in adverse environments makes the MICRO2 Fuse of recommended choice for protection. This product is designed to fit a wide range of vehicles and is suitable for use in both domestic and commercial applications. Its 10 AMP rating makes it ideal for a variety of electrical components, including lighting, audio systems, and more. Provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit

MICRO2 TM blade fuses employ subminiature design, allowing them to provide more automotive circuit protection in less space. Each MICRO2 fuse has passed performance tests proving its reliability in polluted, humid, and high-temperature environments. Features

OptiFuse - Circuit Breakers - Automotive Manual Reset Type III - MRCBP4-PL". www.optifuse.com. Archived from the original on 7 October 2021 . Retrieved 12 January 2022. There are a number of lookalike fuses which can easily be confused with these. In general this type of fuse will have an "AG" label of some kind, which originally stood for "Automobile Glass". [12] There are at least seven different sizes of fuses with a 1/4 inch diameter. The fuses listed are the most common for the size, which is always a fast-acting fuse:

Dual slot fuse holders let you turn one fuse slot into two (in some way, similar to a power strip, but for fuses). Automotive fuses are a class of fuses used to protect the wiring and electrical equipment for vehicles. They are generally rated for circuits no higher than 32 volts direct current, but some types are rated for 42-volt electrical systems. They are occasionally used in non-automotive electrical products. Automotive fuses are typically housed inside one or more fuse boxes (also called an integrated power module (IPM)) within the vehicle, typically on one side of the engine compartment and/or under the dash near the steering wheel. Some fuses or circuit breakers may nonetheless be placed elsewhere, such as near the cabin fan or air bag controller. They also exist as circuit breakers that are resettable using a switch. [1] size, type AGB, 0.177in (4.5mm) diameter by 0.588in (14.9mm) long (frequently replaced with 5mm diameter by 15mm long international size fuse (aka 5 x 15mm - now more readily available) [13] There may be a fuse for ignition off draw (IOD), which controls the drawing of electric current in a vehicle while it is shut off; removing this fuse while the vehicle is shut off for more than a few weeks will prevent excessive depletion of the battery. [ citation needed] Blade type [ edit ] Blade type fuses come in six physical sizes: Micro2, Micro3, low-profile (LP) Mini, Mini, Regular, Maxi

Benefits

Complies with: SAE 2741 and ISO 8820-3 in reference to electrical, mechanical and environmental performance requirements

Thanks very much form both replies, managed to sort in the end, as the Mini fuse, fitted into an empty fuse space in the swift regardless so all sorted size, type AGU, 1A to 60A, 13⁄ 32 inch (10mm) diameter by 1 + 1⁄ 2 inches (38mm) long. [10] Also called "Midget fuses." [14] Where space permits, a miniature circuit breaker is sometimes used to replace a blade-type fuse in the same fuse holder. A range of Micro Fuses from 2 – 30A for automative applications. Amps is denoted by text and colour but please note colours may vary.These SFE fuses all have a 1⁄ 4 inch diameter, and the length varies according to the rating of the fuse. The micro 2 blade fuse is the new standard for vehicle circuit protection. Its sleek miniature design meets the need for more circuits to be protected whilst utilizing less space and its ability to cope with high temperatures in adverse environments makes the MICRO 2 perfect for high-spec automotive & marine applications.