It’s possible to mix water washable resin with normal resin and still get great results as many users have done. You shouldn’t have to adjust your exposure settings since they tend to use the same curing times. It kind of defeats the purpose though because it probably won’t wash very well with water. Some people do still choose to clean water washable resin prints with alcohol, so that’s still an option if you choose. They say it makes the prints a lot easier to wash than normal resin. It’s a better idea to partially mix water washable resin with a flexible resin to reduce the brittleness and add some durability to the model. Is Water Washable Resin Toxic or Safer?

Water-washable Resin – ELEGOO EU

Some people did complain about water washable resin being more brittle, but there are mixed opinions on this, with others saying it works just fine as long as you use the correct exposure settings and don’t over cure your models. In many cases, curing times of 2-5 minutes can work well so it really depends on the complexity of your model and if it has nooks and crannies that are hard to get through to. However, a user once used different types of resin including the Elegoo Water Washable resin to 3D print 3 different miniatures. He noticed that the water washable resin was more brittle and had more tendency to break than the other prints.The issue that surrounds mixing water washable resin with normal resin is the right resin setting that should be used after mixing them together. In the YouTube video earlier in this article from Uncle Jessy where he reviewed the Elegoo water washable resin, he mentioned that he used about 10 – 20 minutes to cure each side of his Gambit Bust Eastman model. Water washable resin sounds like a great idea. In theory, it allows you to post-process your models easier and clean them with just regular tap water. These are the specs listed by Elegoo: Water washable resin is better in regard to cleaning your models since they are easier to clean and doesn’t require isopropyl alcohol or another cleaning solution. They are known to smell less than other resins and can still produce similar great details and durability in models. It is more expensive than normal resin. Print times vary a lot depending on what printer you have, especially if you have a monochrome screen which had normal exposure times of around 2-3 seconds.

ELEGOO Water-washable Photopolymer Resin Colored 1KG – ELEGOO EU

I have noticed that hollowing prints with thin walls made from water washable resins can prove difficult even when you use the default settings on ChiTuBox while other types of resin can print absolutely fine with hollows. A user who was printing at home with no good workshop for cleaning saw the resin by chance and decided to try it out. They found it helpful in printing their miniatures with great details and precision on the models. Another difference is that water washable resin produces a low toxic smell, unlike regular 3D resin. This has been the excitement that most users have had with the water washable resin since this means there will be a reduced risk of inhaling toxic fumes.

What is the Best Water Washable Resin?

Before I got the Phrozen Cure V2, I was curing the models in the sun. Now, with the Cure V2 this is much better and I can be sure that the model is cured evenly. Experience with water washing It goes without saying to always take the necessary precautions when handling resin, and use gloves when touching uncured resin. Commodity is NOT an excuse to just wash the models directly in the sink, even though the resin is marketed as water washable. Please act in a responsible way, even if it takes a bit more work. Elegoo Water Washable Resin Conclusions Water Washable, no IPA Needed】 Instead of using IPA to clean up the prints, you can use tap water to wash the prints, save your money on IPA. ELEGOO 3D resin is formulated with high-quality pigments and photoinitiators, so that each model printed has beautiful color display just like an artwork.