Just as with any type of mould in the home, the main culprits are too much moisture and damp in the air and poor ventilation. Where wood is located on a cold, external wall the problem may well be worse. Bare wood, being pretty porous, makes a great breeding ground for mould too, with no protective coating to prevent the mould from working its way into the grain. How can I prevent mould from returning? Clean all form surfaces thoroughly prior to application. Remove all rust, scale and/or previously used form release agents from the forms, in accordance with good concrete practices. It is imperative when using new timber forms of all types (plain wooden, plywood, rough cut etc.) that Speed//STRIKE be applied and reapplied until complete saturation has been accomplished prior to first use. Application DSO provides a damp proof interface that protects the formwork and ensures even texture and colour of concrete. Mould oils come in diverse formulations tailored to specific applications and materials. Whether water-based, solvent-based, or silicone-based, each formulation offers distinct advantages depending on the type of mould and material being used.

CMT Group ensures that you, our valued customer, enjoys your shopping experience as we strive to make your experience ‘hassle free’.

This is a water-based mould releasing agent which gives clean and stain free high-quality concrete. It is available in a sprayable form and ready to use as a direct application on required places. It should be applied in light film either by brush or mould oil sprayer. If it is over applied, excess oil should be drained before it dries. Pools of DSO cannot be allowed to dry as it causes surface retardation of concrete. THORCAST Mould Oil is a formulated blend of mineral oils with additives and a degree of surfactant designed to work as a concrete release oil for demoulding concrete from all types of formwork moulds. It can be used on a wide range of metal, proprietary timber, ply and other formwork materials and coatings, however if using on plastic or rubber moulds consideration should be given to using our Norsekem Teknistrip. Formulated to give optimum release and quality of finish to concrete over a wide range of mix designs. Product is low hazard and not labelled as flammable.

Product is supplied ready for use do not dilute. All formwork surfaces should be clean prior to application. Apply a thin uniform coating to the formwork surface avoiding over application. Spraying is the preferred method of application using a sprayer such as a Mesto Ferrox Plus 3585P or Mesto Profi Plus 3270P with an 8001 Nozzle fitted , however brushes or rollers may be used. Ensure any excess is mopped up as over application can cause dusty concrete, pay particular attention to the bottom of vertical shutter for run off. Mould is dangerous and can cause all kinds of health issues, from skin rashes to breathing problems. For this reason, when removing mould spores from wood, protect yourself by wearing a mask, eye goggles and long-sleeved clothing —if you have protective clothing you could put on over your usual clothing it will be even better. You should also wear rubber gloves. Condensation can be a major culprit when it comes to mould on timber. (Image credit: Getty) Removing mould from bare wood Mould on bare wood can be harder to remove than that on painted wood —a light sanding after removal can really help. (Image credit: Getty) Which products remove mould from wood? If the wood in question has been painted or stained, it is less likely that the mould you will be removing will have penetrated the timber, meaning removing it should be easier than if you were dealing with bare wood.The performance of shuttering oil is largely dependent on the type of formwork that is being used. For wooden formwork, straight refined, pale, paraffin-based mineral oil and oil-phase emulsion have been successfully used. The oil that is chosen should be capable of penetrating the wood to some extent while leaving the surface slightly greasy to touch. Work the solution into the wood, leave it to get to work for a hour or so then wipe away using a damp cloth. Applying mould oils is a flexible process that can be accomplished through various methods such as spraying, brushing, or wiping onto the mould surface. The choice of application method depends on factors like mould type, accessibility, and the consistency of the oil being used. At Trent Oil, we aim to supply the best quality concrete mould release oils to our construction and manufacturing customers. Our specially designed oils for mould release are available in an assortment of sizes and quantities. In the case of wooden formwork, shuttering oil prevents water absorption from concrete by the wooden formwork.

Once the concrete is set, the shuttering is removed and the process repeated.The use of mould oil also extends the life of your road forms and concrete shuttering, protecting equipment from concrete build up, and ensuring strong and accurate edges and easy formwork release. The first is to use a solution made up from vinegar and water — in equal parts. Vinegar will not only get rid of the mould but it should also help eliminate or at the very least fade out, the stains. Use a spray bottle to apply the solution, allow it to sit for a couple of hours, then wipe the area down with a damp cloth or rag. If those pesky stains still refuse to budge, it is time to try a solution made from bleach and water. Experts recommend using one part bleach to four parts water —some even suggest adding a bit of washing up liquid in too. The use of barrier paints extends the life of the formwork by producing a hard-wearing surface on the formwork. If barrier paints are not used, it is advised to use three coats of shuttering oil before the shuttering is used for the first time.

Both baking soda and vinegar are a better choice for killing off mould than bleach. You can use them separately or combine them to create your own mould killer." With these exclusive ingredients in addition to the product's high molecular weight makes for an extremely effective and well-performing cleaner that combines chemical action with a preventative barrier to provide twice the separation capabilities you would find in a lesser agent.

There should not be any free oil on the wood surface. The form release agents that are good for wooden formwork are not always suitable for steel formwork. And hence the shuttering oil or form release agents should be chosen based on the type of formwork that is to be used for construction. The main purpose of mould oils is to make it easier and cleaner to release the finished product from the mould, while also maintaining the integrity of the mould. Here are some key points about mould oils: You can often tell whether or not the mould has got into the wood as stains tend to linger even after trying the soap and water method.However, before any mould problems can be fully resolved, it is vital to understand what causes dampso you can work out where the problem is originating. Damp and condensation are both prime causes of mould on all kinds of areas of the house, from walls and ceilings to wooden furniture and even fabrics such as curtains. Mould oils play an essential role in enabling efficient production processes, enhancing product quality, and extending the life of moulds in diverse industries such as manufacturing, construction, automotive, and plastics. What mould oils can you supply?