Final Cleaning: Clean the surface carefully with a fine hair broom so that all JOINT-IT residue is removed. When using Joint-It Simple with either granite or slate, pause briefly after soaking your paving, before opening the bucket of Joint-It Simple, to allow time for the stone to absorb the water.

It is recommended that Black Limestone and Honed Black Granite are pre-sealed prior to application of Joint-It Simple.This easy jointing compound provides the ideal solution for professional contractors and homeowners.

Still, more effort is required to get the product to full depth, faster and easier to apply than traditional methods. A quick application of Joint-It So Clean will keep your patio looking refreshed, clean and tidy – removing any lichen, moss and algae that may have settled in shaded areas. Flat gravel driveways would require sheets of plywood for the wheels of the manual pallet truck to roll on. It is important to make sure that the bucket is protected from any punctures or piercing as contact with air will start to harden the product.Apply the required amount of Joint-It Slurry Primer to the base and the underside of the slab and reapply the paving slab in place. Joint-It Dynamic provides a strong, flexible, and durable paving joint and is designed to withstand the extremes of the British weather; rain and temperature extremes. As you can see from the illustration below, there is not enough surface area at the bottom of the V joint to hold Joint-It Simple in place.

Deliveries are kerbside only, although the drivers will usually attempt to place on the driveway if possible.Make sure that brushes are clean before you start, and we recommend that you wash off any particles of the product when you have finished to stop it hardening on your brushes. We also sell power tools such as the ‘Grabo’ vacuum suction cup lifter which lifts tiles, slabs, paving, glass, concrete, drywall, plywood, furniture, timber and grabs rough, porous and even wet surfaces.